The following options are available in the Content area for Custom Distribution reports:
Report Item Type
Contains the primary table for the selected application and any auxiliary tables for which you have privileges. Select the table that contains the information for the report.
For reports based on primary tables, the project you select when creating a report determines which items are returned in your report. The project selection also determines where the report is stored and which users can access the report. For example, if you select Project A, only users who have privileges to run reports in Project A can run the report.
For details, refer to Selecting a Report Project.
Refer to: Adding Join Conditions.Note:
- For information on why you would use the join condition, see Including Data from Related Items.
- The table that is selected in the Report Item Type drop-down list determines which Single Relational fields are available for the Row. The table that is referenced in the join determines which fields are available for the Column.
- Only Single Relational fields that point to a different table are available for the Row definition.
- Because a distribution report uses only two fields, only one join can be added. This also means that if you add a join, sub-relational fields are not available for either the row or column definition because only one reference to another table is allowed.
Add button may disabled due to the
- The application has no Single Relational fields.
- All of the relational fields point to restricted tables which you do not have privileges to view tables or created reports.
- An existing join condition can be modified or deleted by selecting it and clicking Delete or Change.
- Report Style
Choose how to display your report.
Consider the following information when you select a report style:
- For graphical reports, labels may be truncated for fields that contain long selection values.
- If you select a tape chart and your data set contains more than five items, the lines in the chart may appear as black.
- The tape chart, area chart, and line chart styles do not display any data if the X axis contains only a single data point. For example, if you create a Distribution report, select a project with no sub-projects, and then set Project as the Row entry, no data appears for these styles. If you select a project with sub-projects (and there are items in the sub-projects), data is shown.
- Row and Column
Select fields that appear in the report. Rows appear horizontally and columns display vertically. You can choose selection fields, such as User, Single Selection, Single Relational, Sub-Relational, Binary/Trinary, Multi-Group, Multi-User, and Multi-Selection fields. Avatars are displayed above the user name when you specify a User field as a row.
Available Sub-Relational fields include those that point to Single Relational, Single Selection, and User fields. You can specify Sub-Relational fields that point to auxiliary table fields, other primary table fields, or Sub-Relational fields in the current primary table for both the row and column definition. However, Sub-Relational fields cannot be used with join conditions.
- Sum Totals By
Enables you to see the sum of certain field values rather than count each item returned by the report as one. The following table lists the applicable field types and examples.
Field Type Notes Example Date/Time Applies to Elapsed Time fields only. Use to track the amount of work spent on a set of items, such as a team's work for a sprint. Numeric Use to track the amount of money spent on a set of items or the number of sprint points allocated for a set of items. Single Selection Applies only to weights assigned to Single Selection field values. If weights are not applied, each item is counted as a single item.
Contact your administrator to learn about the weights assigned to Single Selection fields in your system.
A Priority field may have these values and assigned weights: of High - 100, Medium - 50, and Low - 10. Each item returned by the report is counted using the weight from its Priority field selection.
To suppress values for the field you select, use the options available in the Sorting section. For details, refer to Sorting.
Search filters enable you to narrow your search for items. Depending on your privileges, you can define basic conditions or Advanced SQL Conditions.
|Include Items From Sub-projects||Select this check box to include items from sub-projects of the project selected from the Report Project list. This option is not available for reports created against auxiliary tables.|
|Show Search Filter In Results||Select this option to display your Search Filter settings in the output of the report. This option allows report viewers to see which filters are used in the report. It is also helpful when you select to print a report, since it displays which Query At Runtime parameters were selected.|
|Limit selections using field dependencies and project selections||
Select this check box to use the project's field dependency rules.
For example, in Project A, the Priority field has a dependency with the Severity field. The dependency states that when the Severity field is Critical, then the Priority field must be 1 or 2.
You create a report on Project A and add a Search Specification of Severity in Critical. Then, you add a Search Specification for the Priority field. The available Field Values for the Priority field will be limited to 1 and 2.
Changing this setting does not affect values that have already been selected.
Restriction: Dependencies are only honored for fields that have the Allow searching option selected in the field definition.
|Use Basic Conditions||Allow you to define a search filter by making selections from the list of fields. For detailed information about using basic conditions, refer to Using Basic Conditions in SBM Reports.|
|Use Advanced SQL Conditions
(on-premise customers only)
SQL (Structured Query Language) is an industry-standard language for selecting records from a database. For detailed information about using Advanced SQL conditions in SBM reports, refer to Using Advanced SQL Conditions in SBM Reports.
By default, all values for fields selected for the report's row and column appear in the report. However, you can suppress and reorder Row and Column field values. For example, if you select the Submitter field for the row, you can choose to display the number of issues submitted by specific users rather than by all users who submitted issues.
To suppress Row and Column field values:
- In the Sorting section of the Distribution report form, click the Modify button in the Show Only Row Field Values area.
The field values for the field selected in the
Row list appear in the left pane. Select the
values you want to appear in the report, and then click the right arrow to move
the values to the right pane.
Tip: If there are more field selections than can be returned based on administrative settings, use the Value Find feature to search for values.
- Use the up and down arrows to reorder the values as needed.
- Click OK.
- Click the Modify button in the Show Only Column Field Values area.
- The field values for the field selected in the Column list appear in the left pane. Use the Value Find as needed. Select the values you want to appear in the report, and then click the right arrow to move the values to the right pane.
- Use the up and down arrows to reorder the values as needed.
- Click OK.
The following options are available in the Additional Options area of the Custom Distribution report form. These options can be considered "advanced" report options.
- Use Logarithmic Scale (Graphs
Select this check box to apply a logarithmic scale to your report. You may want to do this to reduce your report results to a manageable range if they cover a large range of values. This option only applies to certain report styles, such as line, scatter, and bar charts.
- Show Whole Rows and Columns of Zero
By default, Distribution reports do not show rows that have only zeros as values. Select this check box to show the rows that only have zeros as values.
- Show All Labels
Some display labels are skipped if a large number of values is returned on the horizontal axis. Select this check box to show all labels. If the labels are difficult to read, clear this check box to show fewer labels. This option does not apply to tabular reports.
- Show Chart Values
Select this check box to show the number of items returned for each row on the graphical report. If a large number of values are returned, they may be difficult to read. You can clear this check box to show fewer values. To see values, hover your mouse over a bar or pie segment to view the number of items returned. This option does not apply to tabular reports.
Thresholds allow you to apply visual indicators to your report that inform you when data rises above or falls below numbers you specify. Apply a color to each threshold that appears in the background of the report.You can set a high threshold, a low threshold, or both. Thresholds cannot be used with percentile stacked bar charts, pie charts, doughnut charts, heatmap charts, or radar charts. The following threshold options are available:
Set High Threshold Greater Than – Type a number that indicates a high threshold when the report data is greater than that number. For a report that tracks the number of items submitted by particular users, you may want to set a high threshold that indicates when over 75 items have been submitted.
Set Low Threshold Less Than – Type a number that indicates a low threshold when the report data is lower than that number. For a report that tracks the number of items submitted by particular users, you may want to set a low threshold that indicates when fewer than 10 items have been submitted.
Using Color – Click the Color link for each threshold to open the Select Color dialog box and select a color for each threshold. You must select a color if you set a high or low threshold. The color for each threshold appears in the background of the report.
Optionally, supply a footer for your report.Note: The footer renders some common HTML tags such as <i>, <b>, and <font>. However, this means that character entity references such as >, <, ", and & are not encoded in the footer. Therefore, in order to display <Some Text> in the footer, you must send the following encoded sequence: <Some Text>.
- Optional HTML
This drop-down list contains HTML templates for customizing the look of your report. Provided templates include excellist.htm, which improves the display of Listing report results when they are exported (by right-clicking the report output and then selecting Export to Microsoft Excel), and massselectlist.htm, which provides buttons at the top of the page, enabling you to select or clear the check boxes for all items in the results list. Your administrator can customize report templates, and the templates in the list may or may not apply to the type of report you are creating. Select the template from the drop-down list.If you change the HTML template in a report that is on a dashboard, the change is not reflected in the affected report. You must re-add the updated report after you save the template change.Note: This option is available for Listing reports.
- Choose Colors for Values
Choose custom colors for values shown in graphical reports. Values are based on the row and column fields you selected on the Content tab. Depending on the report style, color may be applied to row values, column values, or both. If you do not select colors, random colors are used.
Drill-Down Display Options
- Drill-Down Display Options may not be available if your administrator has disabled Flash components or in browsers that do not support HTML5.
- You cannot drill down into a report when it is contained in a Drill Through report and used to drive another report. See Drill Through Reports for more information.
|Use Value Display Format||Select this check box to use the default columns for the drill-down report. Clear the check box to enable the Select Columns to Display feature.|
|Select Columns to Display||Select the fields that you want to appear as columns in the drill-down reports. To select or deselect a field, move it to or from the right-hand box using the arrow buttons.|
|Set Custom Field Widths||Optionally, specify the width (in pixels) for the columns in the drill-down reports.|
|Sorting||Select the fields on which you want to sort the data in the drill-down reports.|
Custom Distribution reports return a tabular or graphical representation of items based on your report criteria.
The following information and options appear with Custom Distribution report results.
|Show TSV||Click this button to open a window that displays the
report in a tab-delimited format. This enables you to copy the report
information and paste it into a spread sheet application, such as Microsoft
Note: This option is not available for graphical reports. Alternatively, you can choose the Excel option to export report results.
|Graph or Table||Depending on the style you selected when you created this report, a table or graph showing the data that meets the report parameters displays.|
|Drill-Down||Distribution reports can be
clicked to display detailed information about the report results. For example,
if your report contains a count of items submitted by a specific set of users,
each count of items submitted by a user appears as a link (tabular display) or
clickable slice (graphical display). Click the count number to display a
Listing report of those items. Zero counts do not
appear as links. To return to the original report after viewing the
Listing report, click the
Back to Results link.
Tip: If links are not available on the drill-down report, simplify the report specifications on your originating report.
Note: For Rich Graphical Reports, you must disable slicing before you can click to drill-down.
|Thresholds||If you configured thresholds on the report form, the color
you indicated for each threshold displays on the report background.
Note: If you do not have privileges to view data from specific fields, the information appears as asterisks in the report.