You can limit the displayed build jobs to a specific user name by setting a user name filter.
To set a build job user name filter:
Select the Build Monitoring tab.
In the navigation pane select Running Jobs.
On the toolbar click Filter.
The Set Build Job Filter dialog box appears.
Click Add.
The Add Build Job Filter Condition dialog box appears.
Define the filter condition using the following guidelines:
If you want to view your own build jobs, click the check box labeled Current User.
If you want to view build jobs by another user, enter the name of that user.
NOTE The filter defines an exact match. Entering a string such as "Smith" will match "Smith" only—not "Smithson" or "Smithee". To match multiple strings, use the asterisk (*) as a wildcard—in this example, you would enter "Smith*".
If you want to exclude build jobs by yourself or by another user, select Exclusive from the Inclusion Type field.
To match (or exclude) multiple user names, enter multiple conditions. You can only specify one name per condition.
When you have finished defining the filter condition, click Apply Condition. The filter condition appears in the Filter Conditions list box.
Click OK to accept the Add Build Job Filter Condition dialog box. The Active Jobs heading changes to indicate that the view is filtered.