Verifying the Installation of SERSERVC

To verify the installation of SERSERVC, do the following:

1. Start the server by issuing the /S (Start) console command in SDSF:

   /S SERSERVC

2. Ping SERSERVC locally to verify that it is operational.

   1. At the TSO command line, enter:

      SERCMD PING

   2. You should receive the response ok.

3. Ping SERSERVC from a Web browser to verify network connectivity.

   1. From any Web browser, type

      http://ip:port/?PING

      where

      ip   is the IP address assigned to the LPAR where SERNET resides

      port    is the port number assigned to the exclusive use of SERSERVC

   2. You should receive the response ok.