Contents

Important Notes

Note the following important information about this release:

• As of SBM 11.5, the SBM User Workspace interface has been removed. This means end-users now work with items exclusively in SBM Work Center. Note that users do not need to change any bookmarks or favorite URLs; all requests sent to http://serverName/tmtrack/tmtrack.dll? are automatically directed to the SBM Work Center shell.
• SBM 11.5 requires License Manager 2.2 or higher. You must upgrade to version 2.2 or higher before you upgrade SBM.
• Solution releases prior to and including Service Manager / Request Center 5.2 and Release Control 6.0 will not run properly on SBM 11.5 and these versions are not supported.

  You will need to upgrade the solution framework for each solution to newer, compatible versions before you can use them.

• If you have Professional licenses and use Version Manager and SBM 11.5.1 simultaneously, you must update your Version Manager configuration to avoid potential licensing issues. For more information, refer to solution S140767.
• SBM has been rebranded—Serena Business Manager (SBM) is now Solutions Business Manager (SBM). Serena Work Center is now SBM Work Center. A new logo appears in SBM Work Center.
• SBM is now certified against Internet Protocol version 4 (IPv4) and Internet Protocol version 6 (IPv6). Note that SBM requires that both IPv4 and IPv6 stacks are present on each server, though IPv4 can be disabled.
• This release also addresses the following potential security vulnerability: CVE-2018-19645 (Authentication Bypass). For more information, please refer to the MITE website (http://cve.mitre.org/cve/search_cve_list.html) or the SBM 11.5 Security Bulletin (available here). Special thanks goes to Alessio Sergi of Verizon Enterprise Solutions for responsibly disclosing this CVE.

  The following additional CVEs have been addressed in SBM 11.5 hotfix 1: CVE-2018-19641 (Unauthenticated remote code execution), CVE-2018-19642 (Denial of service attack), CVE-2018-19643 (Unauthenticated web services), and CVE-2018-19644 (Reflected cross-site scripting). To download SBM 11.5 hotfix 1, see P2843. Special thanks goes to Alessio Sergi of Verizon Enterprise Solutions for responsibly disclosing these CVEs.

• SBM 11.5 is available in U.S. English only.

Supported Upgrade Paths

Upgrades to SBM 11.5 are only supported from SBM 10.1.5.X or higher. Refer to the following list for guidance on upgrading from your current version.

• Upgrading from 11.X or later

  If you are upgrading from 11.X or later, refer to Upgrades from 11.X.

• Upgrading from 10.1.5.X

  If you are upgrading from any version in the 10.1.5.X line, refer to Upgrades from 10.1.5.X.

• Upgrading from versions of SBM prior to 10.1.5.X

  If you are upgrading from 10.1.X, upgrade to 10.1.5.X first, and then upgrade to 11.5.

  If you are upgrading from 2009 R4, you can upgrade to any version between 10.1.5.X and 11.0.1.1 before you upgrade to 11.5. Use the upgrade instructions in the corresponding readme for the first upgrade, and then upgrade to 11.5 using the instructions in either Upgrades from 10.1.5.X or Upgrades from 11.X, depending on the version you have after the last upgrade.

  If you are upgrading from a version prior to 2009 R4, contact Support to obtain the SBM 10.1.5.4 installer, and then follow the upgrade instructions in solution S138037 to upgrade to 10.1.5.4. After you successfully upgrade to 10.1.5.4, you can upgrade to SBM 11.5 using the instructions in Upgrades from 10.1.5.X.

• Upgrading from TeamTrack 6.6.1.X

  If you are upgrading from TeamTrack 6.6.1.X, follow the instructions in the Moving to SBM guide (available in the SBM Documentation Set.zip on the Documentation Center) to upgrade to SBM 10.1.5.4 first (which you can obtain from Support). In addition refer to solution S137372 to learn about the upgrade preparation utility. After you have upgraded TeamTrack to SBM 10.1.5.4, follow the instructions in Upgrades from 10.1.5.X to upgrade to SBM 11.5.

• Upgrading from Tracker

  For information on migrating your Tracker data to SBM, refer to the "Migrating Tracker Data to SBM" solution (S138468).

Build Numbers

The following component build numbers apply to this version:

• SBM Work Center: 11.05.00.00.2036 (Build 1084)
• SBM Composer: 11.5 (Build 481)
• SBM System Administrator and SBM Application Administrator: 11.05.00.00.2036 (Build 1084)
• SBM Application Repository: 11.05.00.00.2036 (Build 323)
• SBM Configurator: 11.05.00.00.461
• Database version: 1150000027
• Documentation: English – 11.5 | Japanese – 2009 R4.01 (translated content applies to SBM 2009 R4.01)

Helpful Links

Documentation Center

SBM 11.4.1 Release Notes

Supported Platforms

Third-Party Tools

Statement of Direction for SBM User Workspace

Statement of Direction for 32-bit SBM Clients

Contact Us

For specific product issues, contact Support at https://www.microfocus.com/support-and-services/#SBM.

Additional technical information or advice is available from several sources:

• Product documentation, Knowledge Base articles, and videos: https://www.microfocus.com/support-and-services/#SBM
• The Community pages: https://www.microfocus.com/communities/

Requirements and Changes

Before you upgrade to SBM 11.5, read the following important information:

• As of SBM 11.5, the SBM User Workspace interface has been removed. This means end-users now work with items exclusively in SBM Work Center. Note that users do not need to change any bookmarks or favorite URLs; all requests sent to http://serverName/tmtrack/tmtrack.dll? are automatically directed to the SBM Work Center shell.

• The HTML5 Support option in Application Administrator is now automatically selected on upgrade. This means if you were not using HTML5 features in SBM prior to the upgrade, they will be available to your users by default after the upgrade is finished. For details on HTML5 features in SBM, see the SBM Application Administrator Guide.

  If you need to disable HTML5 support, edit the Work Center Settings in Application Administrator and clear the Enable HTML5 Features check box. However, note that disabling HTML5 is not recommended, as future enhancements and non-critical fixes will be focused on SBM with HTML5 enabled.

• If you have defined custom authenticators and identity transformers for SBM in the configuration.xml file, each entry is preserved after upgrade and should appear in SBM Configurator as long as they are defined in the correct section of the configuration.xml file. If you have mistakenly placed authenticators outside of the correct sections in this file, your custom authentication settings will not be preserved. Therefore as a precaution, if you have defined custom authenticators, back up your current configuration.xml file before you perform the upgrade. You can refer to this file to rebuild your custom authenticators in SBM Configurator after the upgrade is finished if necessary.
• If you used HTTP Basic Authentication to manage user sessions prior to the upgrade, SBM Configurator automatically converts this to SSO once the upgrade is finished. The HTTP Basic Authentication option has been deprecated and is no longer available in SBM Configurator because there are more secure options for managing user sessions.

  Electronic signatures are now authenticated according to what is selected for Web services authentication in SBM Configurator if you are using Windows Authentication or Third-Party Authentication System for Browser authentication. Prior to 11.1, electronic signatures were always authenticated against the internal SBM database.

  If you need assistance with re-enabling legacy behavior for either setting, please contact Support.

• In order to prevent notifications from being sent for changes that have not happened recently, SBM now deletes notification events that are older than 90 days that contain a THREADID during the database upgrade. To check if you have events that will be deleted, refer to the SQL queries in solution S140945.
• Work Center search operates on pre-built indices that may change for each SBM release. The Work Center search index is rebuilt when Tomcat is started for the first time after the upgrade. The complete indexing operation can take ample time to finish for very large databases; however, some search results in Work Center begin to appear immediately and the number of results continues to grow while the initial indexing operation works toward completion.

  You can view the overall progress of the indexing operation in the ssf.log file located on the server that hosts SBM Common Services. The log file is located here:

  installDir\Serena\SBM\Common\tomcat\server\default\logs

• For SQL Server systems, ensure that SQL Server Replication is not enabled. If replication is enabled, the upgrade process fails with an error: Cannot drop the table 'TS_XXXX' because it is being used for replication.
• For Oracle systems, note the following:
  • You must ensure that the required roles and privileges for the SBM schema user are up-to-date. Refer to solution S133641 for details.
  • You must perform the database upgrade using either the SBM DSN or a system DSN that uses the "Oracle for SBM" driver. If your system used the Mashup2009 DSN prior to the upgrade, that DSN is automatically converted to use the new "Oracle for SBM" driver.

Planning for the Upgrade

The upgrade process you will follow depends on the type of installation you currently have:

• Single Server Installation – All of the SBM components are installed on a single server.

  For single server installations, you will run the suite installer on your server and then upgrade the databases using SBM Configurator.

• Distributed Installation – The SBM components are installed on multiple servers that comprise a single production environment.

  For distributed installations, you will run the suite installer on each server, and then use SBM Configurator to upgrade the databases.

• Multi-environment installation – The SBM components are installed on single or multiple servers that are separated into multiple SBM environments (such as development, test, and production).

  The process for upgrading multiple environments (used in a path to production model) depends on which environment hosts SBM Application Repository and which environment you plan to upgrade first (Test/Staging first or Production first).

  • If SBM Application Repository is part of the Test environment and you plan to upgrade Test first

    In this setup, each environment uses a single instance of Application Repository that is installed in the Test environment. You will upgrade the Application Engine and Orchestration Engine databases in the Test environment first. After the upgrade in Test is finished, you will not be able to deploy to Production from Application Repository until you upgrade the Production servers and databases.

  • If SBM Application Repository is part of the Production environment and you plan to upgrade Test first

    In this setup, each environment uses a single instance of Application Repository that is installed in the Production environment. You will upgrade the Application Engine and Orchestration Engine databases in the Test environment first. After the upgrade in Test is finished, you will not be able to deploy to Test from Application Repository until you upgrade the Production servers and databases.

  • If SBM Application Repository is part of either Production OR Test and you plan to upgrade all environments at the same time

    If you plan to upgrade all environments at the same time (one immediately after the other), upgrade the instance that hosts Application Repository first (likely Production). This will allow you to upgrade the other environments that do not have SBM Application Repository without installing a temporary instance.

Pre-Upgrade Steps

Follow these steps before you perform the upgrade.

1. Verify that SBM 11.X or later is installed on the System Information tab in SBM Configurator.
2. Back up your existing databases.
3. Back up the SBM installation directory structure on the Application Engine server.
4. Back up the Smart Search index directory on the SBM Common Services server. If you need to revert the upgrade for any reason, you will restore the index from this backup (because the index is rebuilt as part of the upgrade).
5. Consider consulting with your DBA to assess the current table indexes in the SBM databases. Because significant database schema changes do not necessarily coincide with each database upgrade, table indexes are not automatically rebuilt as part of the upgrade process. Over time, indexes can report excessive fragmentation, which could negatively impact performance if they are not rebuilt periodically.
6. Create a new database space in your DBMS to host the Configuration Settings database if you did not create it in a prior release. As of SBM 10.1.5, you can use this database to store configuration settings across your entire SBM installation in one centralized location.
7. Stop the IIS and SBM Tomcat services on each SBM server.
8. Download the new suite and client installers from the Support and Services page.

Upgrading the Installation and Databases

Post-Upgrade Tasks

Review the following information and make any necessary changes after you have upgraded your servers and databases:

• SBM Configurator warns you if your installation currently uses default certificates (which should be replaced) or if your current certificates will expire soon.
  Important: To properly secure your installation, you must generate new key pairs even if you do not plan to use SSO. If you do not generate new key pairs, the default certificates that the STS inherently trusts are used. To increase security, launch SBM Configurator and generate new unique certificate for all components. For details, see "Securing SBM" in the SBM Installation and Configuration Guide.
• For systems that are configured to use client certificate authentication, you must perform additional configuration steps after the upgrade or disable the feature entirely. For details, refer to the entry about client certificate authentication in Installation and Configuration Issues.
• HTML rendering and Rich Text editing is enabled by default for all notes in your system after the upgrade. To disable these features for notes, clear the Render HTML in Notes check box located on the HTML tab of the Settings dialog box in SBM System Administrator.
• User credentials in SBM Application Engine Web service calls that use Basic authentication are now handled exclusively by SBM Application Engine itself, instead of IIS. This configuration is common if your SBM system is set up with NT Challenge Response for end-user authentication. After upgrade, this means that you must now specify the Windows domain for Web service calls in SBM Configurator, otherwise the domain that the IIS server machine is installed on is used for user validation.

• The Require appended text option, available for Journal fields on the Attributes tab (field Property Editor) and the Field Overrides tab (workflow Property Editor) now works as intended. When the Required and Require appended text options are selected, users must append text to the field during a transition. When only Required is selected, users do not need to append text if there is an existing entry.

  In past releases, selecting only the Required option would require users to append text to an existing entry. Now, the Require appended text option must also be selected to require users to append text.

Upgrading Customizations and Integrations

Review the following information for help with upgrading custom changes and integrations.

• If you made custom modifications to any HTML templates, e-mail templates, or online help files, you must merge your changes into the newly-upgraded files, and then use SBM System Administrator to Put Files in Database. All templates and images in the database are replaced by files on your local machine as part of this operation. Backup templates are stored on the installDir\SBM\Application Engine server here:

  installDir\Serena\SBM\Application Engine\Backup<version>-<date>-<time>

  Note: For a list of configuration Files, Web Interface templates, JavaScript files, and strings that have changed in this release, refer to solution S142775. You must manually merge some of your existing SSO customizations into the newly installed files after you upgrade your software and database.
• If you installed the TT4ZMF integration prior to upgrading, you must follow the instructions in the TT4ZMF readme to reinstall the integration after the SBM upgrade is complete.
• If you configured your system to use anonymous events prior to the upgrade, you must either add credentials to your events (preferred) or you must select the Allow Anonymous Events check box in SBM Configurator and enter an SBM user name and password to use anonymous events after the upgrade.

Requirements and Changes

Before you upgrade to SBM 11.5, read the following important information:

• SBM 11.5 requires License Manager 2.2. You must upgrade to version 2.2 before you can upgrade to SBM 11.5.
• As of SBM 11.5, the SBM User Workspace interface has been removed. This means end-users now work with items exclusively in SBM Work Center. Note that users do not need to change any bookmarks or favorite URLs; all requests sent to http://serverName/tmtrack/tmtrack.dll? are automatically directed to the SBM Work Center shell.
• SBM 11.5 requires 64-bit Windows servers. If you are using 32-bit servers prior to the upgrade, you must install SBM 11.5 on one or more 64-bit machines, and then upgrade the databases using the 64-bit installation. As part of the upgrade, review and upgrade any scripts and APIs that were originally created on a 32-bit operating system to ensure that they also run on a 64-bit system. For example, if you have any scripts that load .dll files, those .dll files must be upgraded to run on a 64-bit machine.

• The HTML5 Support option in Application Administrator is now automatically selected on upgrade. This means if you were not using HTML5 features in SBM prior to the upgrade, they will be available to your users by default after the upgrade is finished. For details on HTML5 features in SBM, see the SBM Application Administrator Guide.

  If you need to disable HTML5 support, edit the Work Center Settings in Application Administrator and clear the Enable HTML5 Features check box. However, note that disabling HTML5 is not recommended, as future enhancements and non-critical fixes will be focused on SBM with HTML5 enabled.

• If you have defined custom authenticators and identity transformers for SBM in the configuration.xml file, each entry is preserved after upgrade and should appear in SBM Configurator as long as they are defined in the correct section of the configuration.xml file. If you have mistakenly placed authenticators outside of the correct sections in this file, your custom authentication settings will not be preserved. Therefore as a precaution, if you have defined custom authenticators, back up your current configuration.xml file before you perform the upgrade. You can refer to this file to rebuild your custom authenticators in SBM Configurator after the upgrade is finished if necessary.
• If you used HTTP Basic Authentication to manage user sessions prior to the upgrade, SBM Configurator automatically converts this to SSO once the upgrade is finished. The HTTP Basic Authentication option has been deprecated and is no longer available in SBM Configurator because there are more secure options for managing user sessions.

  Electronic signatures are now authenticated according to what is selected for Web services authentication in SBM Configurator if you are using Windows Authentication or Third-Party Authentication System for Browser authentication. Prior to 11.1, electronic signatures were always authenticated against the internal SBM database.

  If you need assistance with re-enabling legacy behavior for either setting, please contact Support.

• In order to prevent notifications from being sent for changes that have not happened recently, SBM now deletes notification events that are older than 90 days that contain a THREADID during the database upgrade. To check if you have events that will be deleted, refer to the SQL queries in solution S140945.
• Work Center search operates on pre-built indices that may change for each SBM release. The Work Center search index is rebuilt when Tomcat is started for the first time after the upgrade. The complete indexing operation can take ample time to finish for very large databases; however, some search results in Work Center begin to appear immediately and the number of results continues to grow while the initial indexing operation works toward completion.

  You can view the overall progress of the indexing operation in the ssf.log file located on the server that hosts SBM Common Services. The log file is located here:

  installDir\Serena\SBM\Common\tomcat\server\default\logs

• For upgrades from 10.1.X, as part of the database upgrade and migration to the new ODE BPEL engine, data in the CL_CONTEXT_VALUE and CL_LOG tables is deleted. New indexes are added to the CL_CONTEXT_VALUE and CL_LOG tables on upgrade to prevent time outs from occurring when you try to view Common Log data in SBM Composer or SBM Application Repository. In order to add the new indexes, these tables will be emptied during the upgrade process.
  Important: If you need to view Common Log data that was present prior to the upgrade, ensure that you have backed up these tables.
• For SQL Server systems, ensure that SQL Server Replication is not enabled. If replication is enabled, the upgrade process fails with an error: Cannot drop the table 'TS_XXXX' because it is being used for replication.
• For Oracle systems, note the following:
  • You must ensure that the required roles and privileges for the SBM schema user are up-to-date. Refer to solution S133641 for details.
  • You must perform the database upgrade using either the SBM DSN or a system DSN that uses the "Oracle for SBM" driver. If your system used the Mashup2009 DSN prior to the upgrade, that DSN is automatically converted to use the new "Oracle for SBM" driver.
    Important: The underlying driver in the DSN that ships with SBM was changed in SBM in 10.1. If you currently use the Mashup2009 DSN with SBM, you do not need to do anything—the DSN will be updated automatically. If you created your own custom DSN with the "Oracle for SBM" driver prior to upgrading to SBM 10.1 or later, then you must recreate the DSN and use the new "Oracle for SBM" driver that ships with SBM after the upgrade is finished.

Planning for the Upgrade

The upgrade process you will follow depends on the type of installation you currently have:

• Single Server Installation — All of the SBM components are installed on a single server.

  For single server installations, you will run the suite installer on your server and then upgrade the databases using SBM Configurator. The databases are upgraded in two phases—in phase one, the Application Engine database is upgraded; once it completes successfully, phase two begins. In phase two, you are prompted to enter the SBM user name and password of your primary system administrator or an SBM user that has the Remote Administration privilege to upgrade the Orchestration Engine database.

• Distributed Installation — The SBM components are installed on multiple servers that comprise a single production environment.

  For distributed installations, you will run the suite installer on each server, and then use SBM Configurator to upgrade the databases. When you begin the Orchestration Engine database upgrade on the server that hosts SBM Orchestration Engine, you are prompted to enter the SBM user name and password of your primary system administrator or an SBM user that has the Remote Administration privilege. This scenario requires that you start the SBM services and that you perform the database upgrades in a certain order. This is explained in more detail below in Upgrading the Databases.

• Multi-environment installation — The SBM components are installed on single or multiple servers that are separated into multiple SBM environments (such as development, test, and production).

  The process for upgrading multiple environments (used in a path to production model) depends on which environment hosts SBM Application Repository and which environment you plan to upgrade first (Test/Staging first or Production first).

  • If SBM Application Repository is part of the Test environment and you plan to upgrade Test first

    In this setup, each environment uses a single instance of Application Repository that is installed in the Test environment. You will upgrade the Application Engine and Orchestration Engine databases in the Test environment first. After the upgrade in Test is finished, you will not be able to deploy to Production from Application Repository until you upgrade the Production servers and databases.

  • If SBM Application Repository is part of the Production environment and you plan to upgrade Test first

    In this setup, each environment uses a single instance of Application Repository that is installed in the Production environment. You will upgrade the Application Engine and Orchestration Engine databases in the Test environment first. After the upgrade in Test is finished, you will not be able to deploy to Test from Application Repository until you upgrade the Production servers and databases.

  • If SBM Application Repository is part of either Production OR Test and you plan to upgrade all environments at the same time

    If you plan to upgrade all environments at the same time (one immediately after the other), upgrade the instance that hosts Application Repository first (likely Production). This will allow you to upgrade the other environments that do not have SBM Application Repository without installing a temporary instance.

  For information about warnings that may appear during a multi-environment upgrade, see "Handling Warnings with Multiple Environments" in S141802.

If you are upgrading from a release prior to 10.1.2, use SBM Configurator to designate which server will host the SBM Logging Services component. By default, SBM Logging Services appears on an undefined server until you drag and drop it to the desired server. If you are upgrading from a release after 10.1.2, SBM Logging Services is enabled on the same machine as SBM Common Services by default. You can use SBM Configurator to move it to a dedicated server, if necessary (for example, if you set the logging level to TRACE for debugging purposes).

Pre-Upgrade Steps

Follow these steps before you perform the upgrade.

1. Verify that SBM 10.1.X or later is installed on the System Information tab in SBM Configurator.
2. Back up your existing databases.
3. Back up the SBM installation directory structure on the Application Engine server.
4. Back up the Smart Search index directory on the SBM Common Services server. If you need to revert the upgrade for any reason, you will restore the index from this backup (because the index is rebuilt as part of the upgrade).
5. Consider consulting with your DBA to assess the current table indexes in the SBM databases. Because significant database schema changes do not necessarily coincide with each database upgrade, table indexes are not automatically rebuilt as part of the upgrade process. Over time, indexes can report excessive fragmentation, which could negatively impact performance if they are not rebuilt periodically.
6. If you store SBM item attachments on the file system, open SBM System Administrator and note the location of the attachments directory. You will enter the location in SBM Configurator later as part of the upgrade.
7. Create a new database space in your DBMS to host the Configuration Settings database if you did not create it in a prior release. As of SBM 10.1.5, you can use this database to store configuration settings across your entire SBM installation in one centralized location.
8. Stop the IIS and SBM Tomcat services on each SBM server.
9. Download the new suite and client installers from https://www.microfocus.com/support-and-services/#SBM.

Upgrading the Installation

Upgrading the Databases

The database upgrade process occurs in two phases when upgrading from 10.1.X to any version in the 11.X line. Review the following important information before you begin.

• The Orchestration Engine database upgrade is no longer automatically performed after you start the SBM services; instead, you must manually invoke the upgrade process by clicking the Upgrade Database link in SBM Configurator. This ensures that the Orchestration Engine database is not upgraded prematurely.
• If SBM Application Engine and SBM Orchestration Engine are installed on the same server, the Orchestration Engine database upgrade is performed immediately after the Application Engine database upgrade.
• If SBM Application Engine and SBM Orchestration Engine are installed on separate servers:
  • You must ensure that IIS is started on the SBM Application Engine server and SBM Tomcat is started on each of the other SBM servers. Both IIS and SBM Tomcat must be running and all components must be accessible from the SBM Orchestration Engine server before the Orchestration Engine database upgrade begins.
  • You must upgrade the Application Engine database on the SBM Application Engine server first, and then upgrade the Orchestration Engine database on the SBM Orchestration Engine server.
• The Orchestration Engine database upgrade is performed by the renew utility using the user account that you specify when prompted. For details on this process and more information related to the Orchestration Engine database upgrade, refer to S141802.

When you are ready, open the Database Servers tab in SBM Configurator, and then click Upgrade Database.

installDirectory\Serena\SBM\Application Engine\log

If an ORA-00904 message appears in the Application Engine upgrade log after you finish upgrading the Application Engine database, refer to solution S141358 for a description of the problem and a resolution.

After the databases are upgraded successfully, verify that the services are started in the Manage Services tab. Instruct Application Repository users to clear the cache in their Web browsers before they attempt to access SBM Application Repository.

Post-Upgrade Tasks

Review the following information and make any necessary changes after you have upgraded your servers and databases:

• SBM Configurator warns you if your installation currently uses default certificates (which should be replaced) or if your current certificates will expire soon.
  Important: To properly secure your installation, you must generate new key pairs even if you do not plan to use SSO. If you do not generate new key pairs, then the default certificates that the STS inherently trusts are used. To increase security, launch SBM Configurator and generate new unique certificate for all components. For details, see "Securing SBM" in the SBM Installation and Configuration Guide.
• If you store SBM item attachments on the file system, enter the location of the attachments directory on the Common Services tab. This enables SBM Common Services to return attachments in Work Center search results. If you store attachments in the database, skip this step.
• For systems that are configured to use client certificate authentication, you must perform additional configuration steps after the upgrade or disable the feature entirely. For details, refer to the entry about client certificate authentication in Installation and Configuration Issues.
• HTML rendering and Rich Text editing is enabled by default for all notes in your system after the upgrade. To disable these features for notes, clear the Render HTML in Notes check box located on the HTML tab of the Settings dialog box in SBM System Administrator.
• As part of the upgrade, SBM reviews the existing JBoss configuration and allocates the same amount of memory to Tomcat that was previously allocated to JBoss. After the upgrade, if you need to adjust the amount of memory that is allocated to Tomcat, perform the following steps:
  1. Stop the SBM Tomcat service.
  2. Navigate to installDirectory\Serena\SBM\Common\tomcat\bin, and edit the common_config.bat file.
  3. Change the JVM_X_MAXMEMSIZE value as necessary.
  4. In the same \bin directory, execute the update_tomcat_config.bat file.
  5. Start the SBM Tomcat service.
• After the database upgrades are finished, use the Reset Administrative User Access wizard in SBM System Administrator if your database does not contain at least one Regular User or Managed Administrator account with Remote Administration privilege. This wizard enables you to define at least one user as your primary system administrator (an account that has Regular User or Managed Administrator product access with Remote Administration privilege) who can log in to SBM Application Administrator. For details, see the SBM System Administrator Guide.
• User credentials in SBM Application Engine Web service calls that use Basic authentication are now handled exclusively by SBM Application Engine itself, instead of IIS. This configuration is common if your SBM system is set up with NT Challenge Response for end-user authentication. After upgrade, this means that you must now specify the Windows domain for Web service calls in SBM Configurator, otherwise the domain that the IIS server machine is installed on is used for user validation.

• The Require appended text option, available for Journal fields on the Attributes tab (field Property Editor) and the Field Overrides tab (workflow Property Editor) now works as intended. When the Required and Require appended text options are selected, users must append text to the field during a transition. When only Required is selected, users do not need to append text if there is an existing entry.

  In past releases, selecting only the Required option would require users to append text to an existing entry. Now, the Require appended text option must also be selected to require users to append text.

Upgrading Customizations and Integrations

Review the following information for help with upgrading custom changes and integrations.

• If you made custom modifications to any HTML templates, e-mail templates, or online help files, you must merge your changes into the newly-upgraded files, and then use SBM System Administrator to Put Files in Database. All templates and images in the database are replaced by files on your local machine as part of this operation. Backup templates are stored on the installDir\SBM\Application Engine server here:

  installDir\Serena\SBM\Application Engine\Backup<version>-<date>-<time>

  Note: For a list of configuration Files, Web Interface templates, JavaScript files, and strings that have changed in this release, refer to solution S142775. You must manually merge some of your existing SSO customizations into the newly installed files after you upgrade your software and database.

  If you used custom HTML templates in your reports, the reports might not display properly after upgrade. Consider using the default template or modifying it as needed instead. For example, as of SBM 10.1.2, several changes were made to Summary Reports that might not display properly using a custom template from a prior release. Instead, either use the new default template or merge your chanes into the default template to create a new custom template.

• If you installed the TT4ZMF integration prior to upgrading, you must follow the instructions in the TT4ZMF readme to reinstall the integration after the SBM upgrade is complete.
• In SBM 10.1.2, the SSO Login Application (Federation Server) was merged with the SSO Security Token Service (STS) into a single SSO Security Server (also known as the Identity Provider (IDP)). This means that the ALFSSOLogin.war and TokenService.war directories were merged and replaced with a new idp directory on the SSO server.

  If you are upgrading from a release prior to 10.1.2 and you have created custom SSO integrations, you must review all URLs and calls to ensure that they use the latest directory names. For example, if your existing integrations call the Security Token Service (STS), you must ensure that the new idp directory is used.

  The endpoints of the SSO services must be changed accordingly. The relative URIs will stay the same, but since the application is new, the login application entry point will be http(s)://host[:port]/idp/login. For the STS, it will be: http(s)://host[:port]/idp/services/Trust.

• If you configured your system to use anonymous events prior to the upgrade, you must either add credentials to your events (preferred) or you must select the Allow Anonymous Events check box in SBM Configurator and enter an SBM user name and password to use anonymous events after the upgrade.